So I am working on doing some trajectory simulations in Maple using standard Newton's Laws, some force expressions, and initial conditions.

Anyway, the numerical solution works fine if I let the initial conditions I specified (for z=-1) be actually for z=-0.9. To illustrate, when I give an initial condition like this:

x(-1) = x_0, D(x)(-1) = xd_0, Vz(-1) = v_0

the results don't make any sense. However, when using the same x_0, xd_0, and v_0 and I give initial conditions like this:

x(-.9) = x_0, D(x)(-.9) = xd_0, Vz(-0.9) = v_0,

the solutions at least make a bit of sense.

What's weird is that, when I let z -> 0.93 or so, the solution changes discontinuously. And this shouldn't happen. The initial conditions were calculated for and should work for z = -1. I don't understand why they aren't.

Here is my Maple document. ics1 are the problem.

dsolve_field_traject.mw

Do you guys have any idea what could be going on?

Hello, everyone!

Last week I’ve encountered problems with integration of Maple 17 in Microsoft Office Excel 2013. The Maplesoft note on the point (http://www.maplesoft.com/support/faqs/detail.aspx?sid=32651) offers some ways of fixing it up, though I’ve run all of them the problem is the same:

While the connection is established, after entering the formula “=Maple(“x+x”)”, the Excel returns “Critical Error in Formula”

Before contacting the Maplesoft Technical Support, I want to ask here whether someone had the same case and managed to solve it.

Many thanks in advance.

the question is as follow:

1)receive two integers p and q

2)declare two local p1 and q1 and give them intial values and q

3)check if p o q are equal or less to zero print works only with positive integers

4)while p1 not equal to q1 then p1-a1 otherwise q1-p1

5)whenever p1=q1 we have the GCD

note:must use procedure and call it for different values of p and q after the procedure is written

-by following the instruction above this is what i got

GCD:=proc(p,q)

local p1,q1;

p1:=p;

q1:=q;

if p<=0 OR Q<=0 then 'works only with positive integers'
else while p1<>q1 do if q1<p1 then p1-q1 else q1-p1

end if;

end do;

end if;

end proc;

but when I call two integers eg:p=2, q=6 -> GCD(2,6) maple just freeze...evaluating....forever. is it because i got the procedure wrong etc? it would be helpful if anyone can help me with this. thanks

Does N variables caylay table have N permutation group so that can generate N functions?

for exmaple 3 variables cayley table have 3 permutation group, for 1, it has a permutation group , for 2 has a permutation group etc.

then does it mean that it has 3 functions, do it need to composite 3 functions in order to get a function belong to this cayley table?

1 1 1

1 2 2

1 2 3

Hi, I am trying to plot these two curves:

I tried:

with(plots);  A := Array(1..2)  A[1] :=plot (0.199563349672261+0.0178636902277546 x^1.14406289706794-0.0182070811144750 x^(1.13867380551454),x=50..2050,  color=red);  A[2]  := plot(0.298910542599302+0.0117459591500434 x^1.00390277106937-0.0137065176395662 x^0.970667551759677, x = 50..2050, color = blue);  display (A);

and I got:

Error, (in plot) unexpected option: .298910542599302+0.117459591500434e-1*x^1.00390277106937-0.137065176395662e-1*x^.970667551759677

so I tried

so I am not sure how I would graph these two functions...

Ive been given a task to write a fuction that will print true/false to if a given line will intersect a triangle given the co-ordinates of the vertices. 
I have a general idea on what needs to be done mathmaticly, but i have poor maple skills and the syntax is killing me.
I would appreciate some help in this regard.

Thanks.

How to show the code in file with extension .lib and edit it?

Hello

Am trying to convert a vector projection to matrix type output.

Attached is a sample worksheet.

Transformation_matri.mw 

I was asked to transform (x+y)^2+(1)/x+y into ((x+y)^3+1)/x+y, I have tried nomer/denom, but i don't how to factorise the nomer bit into (x+y)^3+1 because maple factorise it differently by default. therefore, it would be grateful if anyone can help me with this...please?

I am trying to run the application "The Cosmic Travel Planner" by Christian Bar (CBaer), uploaded on August 21, 2013 on Maple cloud (Mobius@admin). I use the left panel of GUI where "MapleCloud" is opened. While opening the application GUI asks my permission for running some code automatically. After my 'YES' Maple gives me an error:

Startup Code Error
0, "permission denied: no read access (%1)", "C:\Users\Andriy\MapleLib"

I tried to give the permission to folder "C:\Users\Andriy\MapleLib" however unsuccessfuly.

OS: Win 8

Could you help me with this Error? Thank you.

I've just upgraded from Maple 15 to Maple 17, and discover that I cannot any longer write curly right braces in math mode. I use an international (Norwegian) keyboard, where curly right braces should be available by Ctrl+Alt+=, but nothing happens when I try to write this. I can work my way around it by using Copy and Paste, but this is inelegant, particularly when I want to demonstrate Maple for my class of 400 students.

Looking at older posts, I found this question, which concerns inline evaluation with international keyboard in Maple 16. Inline evaluation works fine for me, using Ctrl+Shift+=. So was this fixed at the expense of Ctrl+Alt+= ?

I would like to find the derivative for f(x)=min(x^2 +1, 2x+3) and plot f(x) and its derivative on the same graph. I know the "diff" command works on functions, but I'm not sure how to use it on this one. Suggestions would be appreciated. Thanks!

Good afternoon sir.

I request your kind suggestion to the above cited query.

With thanks & Regards

M.Anand

Assistant Professor in Mathematics

SR International Institute of Technology,

Hyderabad, Andhra Pradesh, INDIA.

Hello,

       I have a huge sparse matrix (1.5e6 x 1.5e6) of both symbolic or non-symbolic form. When I export matrix using ExportMatrix command, it is not writing the matrix in order of rows and columns. To further explain the problem,

          Let A be that huge sparse matrix. I am using

                    ExportMatrix("matrix.mtx",A,format=MatrixMarket)

We expect the output to be,

 1 1 0.1

 1 10 0.65

.

.

.

But it is writing the output as

 

100 1 0.25

100 25 0.65

Hence it is not writing in order. What is the way we can force it to write in order? I do understand using for loop will consume more time.

Good afternoon sir.

I request you to provide the maple approach to workout Wielandt deflation & Hotelling deflation.

With thanks & Regards

M.Anand

Assistant Professor in Mathematics

SR International Institute of Technology,

Hyderabad, Andhra Pradesh, INDIA.