Is it possible to install and operate Maple toolbox 2025.2 with MATLAB R2025b on Linux (Ubuntu 24.04)  platform?

On Ubuntu 24.04 installation process hangs after location of Maple and Matlab folders at installer window.

Any idea what is wrong?

Of course, I know that actual Maple 2025 system requirements mention support only for MATLAB R2024b, but this is an obsolete version of MATLAB.

And finally, Is there any reliable and effective way how to switch between Maple and MATLAB symbolic engine?

Hello, sirs, I need your help to plot a contour for Psi; for this, y should be on the vertical axis and x on the horizontal axis.  My Maple sheet is working, but the output is not according to the desired. Can you please have a look, and for reference, I am uploading a picture. I need my contour to look like the reference picture.

Contour_plot_help.mw

I get this message:

Why is it not working using the menu?

Why are characters printed with additional back ticks when decimal HTML code is used (see output (3) below). lprint((3)) does not print them.

Looks like an exception. Is there a reason for that? Can it be used for something?

Download back_ticks_with_decimal_code.mw

Although several similar problems were asked many years ago (see, e.g., the section “Formal linear algebra” here), there appears to be no new progress so far. It is said that such functionalities exists in the Physics package, but I cannot find any corresponding examples. 
In short, can Maple at present calculate these examples in terms of symbolic array constructs completely automatically?

In Maple 2025.1, why don't all the hotkeys show up when I press the Alt key?

Maple 2025.0 is OK，but update to 2025.1 all the hotkeys don't show up when I press the Alt key.Why?

Hello Maple Community,

I'm working on solving a PDE system for fluid flow in an L-shaped cavity (similar to previous work on H-shaped and square domains ) recently asked by some one here. I've implemented the governing equations in Maple but need help generating contour plots.

I'm attaching:
1. My Maple worksheet l_shape_cavity.mw
2. A PDF with the problem description and equations L_shape_cavity_work.pdf

The main issues I'm facing are:
- Setting up proper boundary conditions for the L-shaped domain
- Generating contour plots for velocity and pressure fields
- Ensuring the solution converges properly

Could you please help me with:
1. Correct implementation of the L-shaped domain geometry
2. Generating proper contour plots
3. Any suggestions for improving the numerical solution

Thank you for your assistance!

With the new ribbon interface (and startup-page disabled) I need to open a new worksheet to make opening files by the recent document menu work.

Can someone reproduce this?

I use the tab key to control the formatting of lists. 

On my computer the tab key spacing under Maple 2025 is a little more than one inch which is too much. I have been through the Maple Help and cannot find how to change the tab key spacing.

Any help will be greatly appreciated.

My current account email is dead so I can only view answers here.

Hello everyone,

I am working on reproducing Fig. 12 (Isotherms) and Fig. 13 (Streamlines) from the attached paper, cacity_paper_work.pdf which deals with natural convection of GO–MgO/silicone oil hybrid nanofluid inside square and H-shaped cavities under a periodic magnetic field.

Equations (9–11) in the paper describe the steady-state 2D flow and heat transfer in terms of u(x,y), v(x,y), and θ(x,y). I have already set up the full PDE system, parameters, and boundary conditions (BCs) in Maple.

Now, iusing pdsolve(..., numeric, method=fd), 

Solve these equations for both square and H-shaped cavities using the given ICs and BCs, and

Generate Isotherm and Streamline plots (similar to Figs. 12 and 13 in the paper).

I have attached:

The PDF (showing equations and figures), and

My Maple worksheet containing the PDE definitions and parameters.

I would really appreciate guidance on:

Whether dsolve can be used effectively for this PDE system,

How to define the BCs correctly for the H-shaped cavity (especially the partially heated wall, θ=1 for 0.4 < y < 0.6), and

How to extract and plot the temperature (θ) and streamfunction (ψ) fields similar to the paper’s plots.

error_in_cavity_work.mw

Given an ode with IC. When solution is explicit, Maple resolves the constant of integration as expected and returns solution with no c__1 in it.

But when asked for implicit solution, also with same IC, it now returns solution with c__1 still there.

Is this by design or a bug? Should not constant of integration be resolved using IC in both cases? If unable to solve for c__1 because solution is implicit, should it then not return solution all?

Does this happen in earlier versions of Maple?

Download why_C_still_in_solution_maple_2025_1_oct_4_2025.mw

I found very strange behaviour of Maple 2025.1 on Linux.

Same exact code.  Calling timelimit(sol,ode) twice on two different solutions. If I do not add 

         Physics:-Setup(assumingusesAssume = true)

At the start, then both timelimits finish OK. But once  Physics:-Setup(assumingusesAssume = true) is added at the start, the second timelimit hangs.

I waited 2 hrs and nothing happens. Maple just freezes. Can't even stop the server from worksheet by clicking on the red button at lower left corner. 

This is using latest Physics.  Does anyone know why this happens? It seems due to some memory cache issue?

Make sure to save all your work before trying this just in case you have to kill Maple application.

The strange thing, unable to stop the server by clicking on red button or clicking on RESTART KERNEL icon at top, or even clicking on the debuger icon at lower left corner. Only way was to kill Maple itself from Linux command line.

Download hangs_timelimit_with_physics_maple_2025_1_oct_2_2025.mw

Could someone try to reproduce this on their Maple? If so, I will send bug report.

Hi! how I install Maple 2025 and Mathematica in my laptop?
Provide me Complete Set-up.

Hi there.

There is an issue with following limits in Maple 2025:

Maple returned an incorrect zero answers. Plotting functions we see that non-zero limits do exist:

Thank you.

limits.mw

I want to change the datatype of a column of a Dataframe imported from Excel.

The import succeeds, and I can change the data type of numeric columns (from the default 'anything' to, say, float).

But conversion fails for all string columns. For example:

DataNew := SubsDatatype(Data, "UN Region", string);

throws the following error:

Error, (in DataSeries:-SubsDatatype) in datatype conversion; try using the 'conversion' option for data type string

The column in question has values such as "Southern Asia", which I would have thought would convert.

What am I doing wrong?