Hi,

I noticed that, in Maple 2020.2, the caracters seem smaller. As if the zoom had somewhat been reduced (a bit).

However, in the preferences, the default zoom level I would like is between 100 and 125% (something like 110%) (since the default zoom level is adjusted by steps of +/- 25%). I wondered if there was a way to set the default zoom level to an arbitrary value. In fact I thought it would be great to have a field instead of a list of choices, so we can choose a custom value.

Thank you

Here is my try to integrate the expression L with trapozoid or simpson 

numerical_int.mw

Dear all

I have  Lie commutations for vectors e1, e2, e3, e4, e5, e6 as follow:

[e1, e3] = e3, [e1, e4] = e4, [e1, e5] = e5, [e1, e6] = e6, [e2, e3] = -e5, [e2, e4] = e6, [e3, e5] = e6

for which the command 

Query("Jacobi")

returns the false result, which means, the vectors are not closed under Jacobi's identity. How can I find vector triplets for which Jacobi's identity does not hold?

Please find Maple file.Jacobi_identity.mw

Dear all, 

I have a time-fractional PDE as follows.  ( denotes Caputo fractional derivative with respect to t) 

for alpha=1, this is a classical PDE and the exact solution is given as follows (in a book)

Question: 

1) for alpha=1, I want to find the L2 errors and L∞ errors in a table. 

2) for alpha=0.5, Can Maple find a solution (numeric or exact)?

MY TRY: (MAPLE 2020.2)

download the code.mw

restart:
with(plots):
PDE:=diff(y(x,t),t)=y(x,t)*diff(y(x,t),x$3)+y(x,t)*diff(y(x,t),x)+3*diff(y(x,t),x)*diff(y(x,t),x$2) ;


#c is an arbitratry constant
c:=4:
exact_sol:=(x,t)->-8*c/3*(cos ((x-c*t)/4))^2;

# I selected initial and boundary conditions as follows
IBC := { y(x,0)=exact_sol(x,0),y(0,t)=exact_sol(0,t),D[1](y)(0,t)=D[1](exact_sol)(0,t),y(1,t)=exact_sol(1,t)};
 	
numeric_sol := pdsolve(PDE,IBC,numeric);

num3d:=numeric_sol:-plot3d(t=0..1,x=0..1,axes=boxed,
            color=[0,0,y]);
exact3d:=plot3d(exact_sol(x,t),t=0..1,x=0..1,axes=boxed);
display(exact3d,num3d);

pdetest(y(x,t)=exact_sol(x,t),PDE,IBC);

Hi

I have a system of pde that it is solved with pdsolve procedure.

This procedure takes a few time, but when I need to do plots, especially 3d plot the software takes a lot of time (several hours).

How can I make plots faster?
Thanks.

I am facing difficulty to realize this double iterative process. 

The equations in question are 

The flow chart for the iterative process is given as

The different parameters are defined as

alphan:=1.72*10^(-4):
alphap:=2.037*10^(-4):
L:=1.3*10^(-3):
A:=2.08*10^(-6):
kp:=1.265:
kn:=1.011:
sigmap:=1.314e-5:
sigman:=1.119e-5:
alphapn:=alphap-alphan:
Rpn:=L/(A)*(sigmap+sigman):
RL:=1:
Kpn:=(A/L)*(kp+kn):
cf:=4205:
cc:=4153:
hf:=80:
hc:=1000:
Tfin:=773:
Tcin:=353:
mf:=20:
mc:=20:

Influence_of_different_cooling_methods_on_thermoelectric_performance_of_an_engine_exhaust_gas_waste_heat_recovery_system.pdf

Has anybody tried Maple 2020.2 on a new Macbook with Apple silicon? I believe native support is in development, i was curious if anyone had experience running Maple via Rosetta 2?

Hello everyone,

I have a problem when searching in a document. Namelly is there a way to search in the whole worksheet including all code editing regions?

In order to show a point, there is a worksheet. I determine a variable

x11:= 12;

This variable is used in the document and code edit regions. Then I want to change a variable name from x11 to x11data. In order to do that, I use Ctrl+F to find all the times when the variable is used. I have a problem while  searching 'x11'. Namelly, the cases outside a code edit region are displayed, and the ones that are situated in the code edit regions are not seen.

Best regards

I used dsolve to solve the Initial value problems numericaly.
When I set the parameter range=1..5*10^4 , it works and cost only about 200s cpu time.
But if I set range=1..2*10^5, it stop running ( cpu time stop) when the mserver memory reach about 1.5 G. (the memory record in the bottom-right of maple interface is about 700M .)

What is the reason please?  

I need help for designing a procedure for Schubert Kronecker polynomial program in maple.

so i have a little school laptop and maple on it works just fine. Then i have my all powerful gaming desktop with an AM RTX 3700x ,RTX 2070S, SSD and 32GB ram.

I have never seen maple run so slow on any pc as i have on my desktop. It is completely impossible to use maple. Just writing normal input like 123 takes forever. One thing i have noticed is evertime i do some sort of action, then the icons to the left slowly go from being colored to grey and back to colored before i can do a new action.

The two images below show an example here you can see it is about to go from being colored to being grey, when i try to mark stuff. I have tried to install the x64 and x86 version, i have tried giving it 4096 ram in the ini file and i have tried removing splash. Nothing works....

I want to find fundamental matrix of the system: X(t).

Actually I need A=X(T) where T is 2*Pi.

So then I can find whether the solution is stable.

The problem is, I don't understand how to find X(t) in Maple. 

Tried to solve numerically with dsolve at t=T but the next step is not obvious.

Eq=z"(t)+3z'(t)+2z(t)=24*(exp(-3t)-exp(-4t)) how to find the gereral solution of this equation. Thank you.

The last months Maple 2020 suffers from frozen interface behavior:

I simply wanted to save a file, but that resulted in a frozen window:

After 10 minutes the file explorer window appeared, but also this screen is unresponsive.

I reinstalled Maple last month, but that didn't help. Remarkably, the problem comes and goes. It seems to me that some java problem is making my life difficult.
Any ideas?
kind regards,

Harry

ps I ran the process monitor of Sysinternals, but I have no idea if this has any relevance to the problems:

11460 RegOpenKey HKCR\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppModel\PackageRepository\Extensions\windows.protocol\Maple.cwmaple.2020 NAME NOT FOUND Desired Access: Read

11460 ReqQueryValue HKCR\Maple.cwmaple.2020\URL Protocol NAME NOT FOUND Length: 12

11460 RegOpenKey HKCU\Software\Classes\Maple.cwmaple.2020  NAME NOT FOUND Desired Access: Maximum Allowed

Would like to export a list into a text file

when I tried , it show ... 1234 items... , can not export a whole list into text file.

[[[0,0,0,0]], [[0,0,0,0]], .....]
thousands of [[...]] elements